Error codes
Look up an error or alarm code from your Fagor CNC, drive or digital readout and see its cause and solution, with a link to the page in the manual.
All codes (4.787)
- 9358 Undefined compensation. CNC 8058 / 8060 / 8065 · CNC 8070
- 9360 Not possible to validate parameters for an axis undergoing gear change. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9361 To change the number of channels, axes or spindles, the CNC must be restarted. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9364 Various axes/spindles cannot share the same REFERENCEID at the same time. CNCelite 8058 / 8060 / 8065 / 8070
- 9364 Various axes/spindles cannot share the same REFERENCEID at the same time. CNC 8058 / 8060 / 8065 · CNC 8070
- 9369 DEFAULSET incompatible with axes/spindles that share the same REFERENCEID. CNCelite 8058 / 8060 / 8065 / 8070
- 9369 DEFAULSET incompatible with axes/spindles that share the same REFERENCEID. CNC 8058 / 8060 / 8065 · CNC 8070
- 9370 CURRBFID not allowed for analog axes. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9371 Unknown motor. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9372 New motor detected. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9373 Malfuntion in the Autophasing command CNCelite 8058 / 8060 / 8065 / 8070
- 9373 Malfuntion in the Autophasing command CNC 8058 / 8060 / 8065 · CNC 8070
- 9375 ABSFEEDBACK and M19SPDLEREV setting incompatible, possible position loss. CNCelite 8058 / 8060 / 8065 / 8070
- 9375 ABSFEEDBACK and M19SPDLEREV setting incompatible, possible position loss. CNC 8058 / 8060 / 8065
- 9375 ABSFEEDBACK and M19SPDLEREV setting incompatible, possible position loss. CNC 8070
- 9376 All linear or all rotary axes and max. 2 rotary axes. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9378 It is not possible to validate parameters of a PWS source while it is enabled. CNCelite 8058 / 8060 / 8065 / 8070
- 9379 Error in the execution of the command to access the Stegmann sensor. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9380 Different corrections for the same position are not allowed. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9381 No more than 1 HBH type flyer is allowed. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9382 Bus configuration, need CNC reset. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9383 Software option not available for GREY drives. CNCelite 8058 / 8060 / 8065 / 8070
- 9384 Drives are not compatible with each other. CNCelite 8058 / 8060 / 8065 / 8070
- 9385 The axes were not able to be prepared. CNCelite 8058 / 8060 / 8065 / 8070
- 9386 It is not possible to validate parameters with axis enabled. CNCelite 8058 / 8060 / 8065 / 8070
- 9387 Trace size (NPOINTS) fixed in this session. NPOINTS maximum reached. CNCelite 8058 / 8060 / 8065 / 8070
- 9388 The master and slave axes must have some parameters that are the same. CNCelite 8058 / 8060 / 8065 / 8070
- 9389 Feedback from third parties. Software option not allowed. CNCelite 8058 / 8060 / 8065 / 8070
- 9500 Overvoltage at the power Bus. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 9501 Overcurrent. CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
Log in to download
New to the platform?
Create an account
·
