Error codes
Look up an error or alarm code from your Fagor CNC, drive or digital readout and see its cause and solution, with a link to the page in the manual.
All codes (4.787)
- 1624 Program #TANGCTRL ON/OFF/SUSP [ ] CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1625 An axis in active tangential control must be rotary, non-HIRTH and it must not belong to the active trihedron CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1626 Program axis for #TANGCTRL ON/OFF/SUSP/RESUME CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1627 #TANGCTRL: program angle values between 0 and ±359.9999 CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1628 An axis cannot be eliminated from the configuration while tangential control is active CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1629 Only one axis can be programmed in tangential control CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1630 The profile has been programmed wrong with labels CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1631 Profile programming not allowed' [S,E,] or [P,] CNC 8058 / 8060 / 8065 · CNC 8070
- 1631 Profile programming not allowed' [S,E,] or [P,] CNCelite 8058 / 8060 / 8065 / 8070
- 1632 An axis in active tangential control must be rotary with 360º module CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1633 Program: #DGSPSL CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1634 The #MOVE instruction only admits one axis and it must belong to the channel CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1635 There are too many axes in the transformation CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1636 The FACE and CYL transforms cannot be active at the same time CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1637 Spindle turning direction incompatible with the tool CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1638 The axes of the angular transform, #ANGAX, must be linear CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1639 The programmed spindle does not belong to the channel CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1640 Parked spindles cannot be programmed CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1641 #CYL: Expecting the programming of the cylinder development radius CNC 8058 / 8060 / 8065 · CNC 8070
- 1641 #CYL: Expecting the programming of the cylinder development radius CNCelite 8058 / 8060 / 8065 / 8070
- 1642 Slaved TANDEM spindles cannot be programmed CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1643 TANDEM spindles cannot be parked CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1644 Spindles cannot be parked in G33/G95 CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1645 #RET/M17/M29 not allowed between the labels of a #RPT CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1646 Program: #ABORT [label]/#ABORT Nxxxx/#ABORT OFF CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1647 The gear does not exist in the TANDEM slave CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1649 User reverse transformation function not found CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1650 User direct transformation function not found CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1651 Maintained LINK not admitted with temporary axes of another channel CNC 8058 / 8060 / 8065 · CNC 8070 · CNCelite 8058 / 8060 / 8065 / 8070
- 1652 #DEF "macro"="command" "macro"="command"... was expected. CNC 8058 / 8060 / 8065 · CNC 8070
Log in to download
New to the platform?
Create an account
·
