Cover: CNCelite 8060/8065 Easyplane
CNCelite 8060/8065 Easyplane
Manuals

CNCelite 8060/8065 Easyplane

Document details

Format
PDF
Size
5.0 MB
Pages
64
Version
V1.0
Updated

Description

This manual provides technical instructions for the EASYPLANE feature on CNCelite 8060 and 8065 CNC systems. It covers 5-axis and 3+2 machining, including coordinate system construction, kinematics activation, inclined plane definition, RTCP management, and tool orientation alignment.

This manual is intended for machine manufacturers and end users to configure and program 5-axis machining operations using the EASYPLANE functionality.

Download document

Available languages

Related products

Document contents

33 sections
  1. INDEX 3
  2. 1 5-axis machining. 19
  3. 1.1 Construction of the coordinate system. 20
  4. 1.2 Behavior of the coordinate systems. 21
  5. 1.2.1 Spindle kinematics. 21
  6. 1.2.2 Table kinematics. 22
  7. 2 Activation of kinematics (#KIN ID). 24
  8. 2.1 Summary of the variables. 26
  9. 3 Definition of inclined planes (#CS / #ACS). 27
  10. 3.1 Rotation about the coordinate axes. 28
  11. 3.2 Angles of the plane projection about the axes. 30
  12. 3.3 Plane defined by three points. 32
  13. 3.4 Plane perpendicular to the tool. 34
  14. 3.5 Cancel the active inclined plane. 35
  15. 3.6 Save the active inclined plane. 35
  16. 3.7 Load a previously saved inclined plane. 35
  17. 3.8 Summary of the variables. 36
  18. 4 Tool perpendicular to the inclined plane (#TOOL ORI). 37
  19. 4.1 Summary of the variables. 40
  20. 5 5-axis machining with RTCP (Rotating Tool Center Point). 41
  21. 5.1 Activate the static/dynamic RTCP. 43
  22. 5.2 Deactivating the RTCP. 47
  23. 5.3 Summary of the variables. 48
  24. 6 Alignment of the machine coordinate system with the part (#CSROT). 49
  25. 6.1 Activation of tool orientation. 50
  26. 6.2 Cancel the tool orientation. 50
  27. 6.3 Management of discontinuities in the orientation of rotary axes. 51
  28. 6.4 Summary of the variables. 54
  29. 6.5 Transform part zero taking into account the table position (#KINORG). 56
  30. 6.6 Summary of the variables. 58
  31. 7 Correct the implicit tool length compensation of the program (#TLC). 59
  32. 7.1 Summary of the variables. 60
  33. 8 Active zero offset table. 61

Technical data

Manual Reference
2508 p. 2
Software Version
v2.50.05 p. 6
Publication Date
August 2025 p. 6

Data extracted from the document with AI and reviewed. Check the value on the indicated page.

Errors and alarms covered

CodeMeaningPage
N/A Feedback alarm for analog axes. p. 2

List extracted from the document with AI and reviewed; it does not replace the manual. See the indicated page.

Related documentation

See all in Manuals

Back to documentation

Downloads

·