Cover: Readout Innova TFT 40i – 3 axes
Readout Innova TFT 40i – 3 axes

Readout Innova TFT 40i – 3 axes

Document details

Format
PDF
Size
2.1 MB
Pages
41
Version
V1.0
Updated
Download document

Available languages

Document contents

65 sections
  1. 1 DRO description 4
  2. 1.1 Front plate: 4
  3. 1.2 Turning the unit on and off 4
  4. 1.3 Main screen description 5
  5. 1.4 Function bar 5
  6. 1.4.1 Accessing functions in MILL mode 5
  7. 1.4.2 Accessing functions in LATHE mode 5
  8. 2 DRO operation in MILL mode 6
  9. 2.1 Display modes 6
  10. 2.1.1 mm / inch 6
  11. 2.1.2 inc / abs 6
  12. 2.1.3 Rad / Diam 7
  13. 2.2 Set/Clear 7
  14. 2.2.1 In "Set" mode (indicated with an "S" on the upper status bar) 7
  15. 2.2.2 In "Clear" mode (indicated with a "C" on the upper status bar) 7
  16. 2.3 Machine reference (home) search 8
  17. 2.4 Tools and references 8
  18. 2.4.1 Tools: 8
  19. 2.4.2 Reference 9
  20. 2.5 Special functions 12
  21. 2.5.1 Bolt-hole drilling 12
  22. 2.5.2 Linear drilling 12
  23. 2.5.3 Grid pattern drilling 12
  24. 2.5.4 Go to 13
  25. 2.5.5 Calculator function 13
  26. 2.5.6 Simulation / execution special modes 14
  27. 2.5.7 Probe 16
  28. 3 DRO operation in LATHE mode 17
  29. 3.1 Display modes 17
  30. 3.1.1 2/3 axes 17
  31. 3.1.2 mm / inch 17
  32. 3.1.3 rad/diam 17
  33. 3.1.4 inc / abs 17
  34. 3.2 Tool 18
  35. 3.2.1 Tool setting 18
  36. 3.2.2 View tool table 19
  37. 3.3 Special functions 20
  38. 3.3.1 Angle measurement 20
  39. 3.3.2 Turning function 20
  40. 3.3.3 Threading function 21
  41. 3.3.4 Calculator function 22
  42. 4 DRO installation 23
  43. 4.1 Mounting on the support arm 23
  44. 4.2 Mounting of the built-in model 23
  45. 4.3 Rear panel 24
  46. 4.4 General technical characteristics 25
  47. 4.5 Connections 26
  48. 4.5.1 Connection of the feedback systems 26
  49. Feedback connection. Connectors X1, X2 and X3 26
  50. 4.5.2 Probe connection (connector X5) 27
  51. Probe connection. Connector X5 27
  52. 4.5.3 Power and machine connection 28
  53. 4.6 Installation parameters 29
  54. 4.6.1 Accessing installation parameters 29
  55. 4.6.2 User parameters 29
  56. 4.6.3 Installer parameters 30
  57. 4.6.4 Test mode 35
  58. 4.6.5 Threading 36
  59. 5 Appendix 38
  60. 5.1 UL seal 38
  61. 5.2 CE seal 38
  62. 5.2.1 Declaration of conformity 38
  63. 5.2.2 Safety conditions 38
  64. 5.2.3 Warranty terms 40
  65. 5.2.4 Material returning terms 41

Related documentation

No related documentation available.

Back to documentation

Downloads

·