Cover: Readout Innova TFT 40iP – 4 axes
Readout Innova TFT 40iP – 4 axes
Manuals

Readout Innova TFT 40iP – 4 axes

Document details

Format
PDF
Size
1.7 MB
Pages
33
Version
V1.0
Updated

Document contents

47 sections
  1. 1 DRO description 4
  2. 1.1 Front plate: 4
  3. 1.2 Turning the unit on and off 4
  4. 1.3 Main screen description: 5
  5. 1.4 Function bar 5
  6. 1.4.1 Access to functions: 5
  7. 2 DRO operation 6
  8. 2.1 Display modes. 6
  9. 2.1.1 mm / inch 6
  10. 2.1.2 inc / abs 6
  11. 2.1.3 Rad / Diam 7
  12. 2.2 Set/Clear 7
  13. 2.2.1 In "Set" mode (indicated with an "S" on the upper status bar): 7
  14. 2.2.2 In "Clear" mode (indicated with a "C" on the upper status bar) 7
  15. 2.3 Machine reference (home) search: 8
  16. 2.4 Tools and references: 8
  17. 2.4.1 Tools: 8
  18. 2.4.2 Reference: 9
  19. 2.5 Special functions. 12
  20. 2.5.1 Cycles. 12
  21. 2.5.2 Programs. 14
  22. 2.5.3 Calculator function 15
  23. 2.5.4 Simulation / execution special modes: 15
  24. 2.5.5 Probe: 17
  25. 3 DRO installation 18
  26. 3.1 Mounting on the support arm. 18
  27. 3.2 Mounting of the built-in model. 18
  28. 3.3 Rear panel 19
  29. 3.4 General technical characteristics 19
  30. 3.5 Connections 20
  31. 3.5.1 Connection of the feedback systems 20
  32. Feedback connection. Connectors X1, X2, X3 and X4 20
  33. 3.5.2 Probe connection (connector X5) 21
  34. Probe connection. Connector X5 21
  35. 3.5.3 Power and machine connection 22
  36. 3.6 Installation parameters 23
  37. 3.6.1 Accessing installation parameters 23
  38. 3.6.2 User parameters: 23
  39. 3.6.3 Installer parameters. 24
  40. 3.6.4 Test mode. 29
  41. 4 Appendix 30
  42. 4.1 UL seal 30
  43. 4.2 CE seal 30
  44. 4.2.1 Declaration of conformity 30
  45. 4.2.2 Safety conditions 30
  46. 4.2.3 Warranty terms 32
  47. 4.2.4 Material returning terms 33
See all in Manuals

Back to documentation

·