Cover: Readout Innova TFT 40iTS Display – Lathe
Readout Innova TFT 40iTS Display – Lathe

Readout Innova TFT 40iTS Display – Lathe

Document details

Format
PDF
Size
1.9 MB
Pages
30
Version
V1.0
Updated
Download document

Available languages

Document contents

55 sections
  1. 1 DRO description 4
  2. 1.1 Front plate: 4
  3. 1.2 Turning the unit on and off 4
  4. 1.3 Main screen description: 5
  5. 1.4 Function bar 5
  6. 1.4.1 Access to functions: 5
  7. 2 DRO operation 6
  8. 2.1 Display modes. 6
  9. 2.1.1 mm / inch 6
  10. 2.1.2 rad/diam 6
  11. 2.1.3 inc / abs 6
  12. 2.2 Set/Clear 7
  13. 2.2.1 In "Set" mode (indicated with an "S" on the upper status bar) 7
  14. 2.2.2 In "Clear" mode (indicated with a "C" on the upper status bar) 7
  15. 2.3 Machine reference (home) search 7
  16. 2.4 Tool: 7
  17. 2.4.0.1 Tool setting: 8
  18. 2.4.0.2 Setting the tool by touching a part of known diameter: 8
  19. 2.4.0.3 Setting the tool by touching a part of unknown diameter: 8
  20. 2.4.1 View tool table: 8
  21. 2.5 Machine control 9
  22. 2.5.1 Spindle Control 9
  23. 2.5.2 Range (gear) change. 9
  24. 2.5.3 Control of maximum spindle speed 10
  25. 2.5.4 Spindle orientation 10
  26. 2.5.5 Emergency input 10
  27. 2.6 Special functions. 10
  28. 2.6.1 Set RPM 11
  29. 2.6.2 Set Constant Surface Speed, CSS 11
  30. 2.6.3 Angle measurement. 11
  31. 2.6.4 Turning function. 12
  32. 2.6.5 Calculator function. 12
  33. 3 DRO installation 13
  34. 3.1 Mounting on the support arm. 13
  35. 3.2 Mounting of the built-in model. 13
  36. 3.3 Rear panel 14
  37. 3.4 General technical characteristics 15
  38. 3.5 Connections 15
  39. 3.5.1 Connection of the feedback systems 15
  40. Feedback connection. Connectors X1, X2, X3 and X4 15
  41. 3.5.2 Input/output connection 37-pin connector 16
  42. 3.5.3 Power and machine connection 18
  43. 3.6 Installation parameters 18
  44. 3.6.1 Accessing installation parameters 18
  45. 3.6.2 User parameters: 18
  46. 3.6.3 Installer parameters 19
  47. 3.6.4 Test mode. 23
  48. 3.6.5 Machine Control 23
  49. 4 Appendix 27
  50. 4.1 UL seal 27
  51. 4.2 CE seal 27
  52. 4.2.1 Declaration of conformity 27
  53. 4.2.2 Safety conditions 27
  54. 4.2.3 Warranty terms 29
  55. 4.2.4 Material returning terms 29

Related documentation

No related documentation available.

Back to documentation

Downloads

·